Tutorial Glitch? Register | Edit Profile | Moderators | Log Out
Topics | Last Day | Last Week | Search

AutoDesSys Forums » form•Z Discussion » Archive 2007 » Archive February 2007 » Tutorial Glitch? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

thedigitaldraftsman
Junior Member
Username: Tdd

Post Number: 47
Registered: 04-2006


Posted on Friday, February 16, 2007 - 03:03 pm:   Edit Post Print Post

ZWebTech,

I'm working through the NURBS section of the tutorial. Section 19.2. I create the 4 lines as instructed and move them as shown. Now, when I activate the nurbs tool Z crashes. Crashed 3 times in a row. I'm on Windows XP Pro - formz v6.1.1

Any ideas?

KSB
Top of pagePrevious messageNext messageBottom of page Link to this message

support@formZ.com
Moderator
Username: Tech

Post Number: 1591
Registered: 04-2001


Posted on Friday, February 16, 2007 - 04:06 pm:   Edit Post Print Post

TDD,

This is working properly for us. Can you post the file that is not working properly?

Also, if you derive Nurbz Curves from your lines first, does the Nurbz by Boundary Curves then work properly?

ZWebTech Support
Top of pagePrevious messageNext messageBottom of page Link to this message

thedigitaldraftsman
Junior Member
Username: Tdd

Post Number: 49
Registered: 04-2006


Posted on Monday, February 19, 2007 - 08:23 am:   Edit Post Print Post

ZWebTech,

I couldn't get it to work either way. Here's the file as you requested. Let me know what you find.

KSB

application/x-zip-compressedNurbsCrashTest
NurbsCrashTest.zip (56.8 k)
Top of pagePrevious messageNext messageBottom of page Link to this message

support@formZ.com
Moderator
Username: Tech

Post Number: 1598
Registered: 04-2001


Posted on Monday, February 19, 2007 - 09:19 am:   Edit Post Print Post

KSB,

Thanks for the file. We have verified this problem and will get it corrected. If you Select All and click with the Nurbz Curve Tool (first tool on the row to the right of the (Boundary) Nurbz tool), then you will be able to Select All and generate the Nurbz from Boundary Curves without problems.

Thanks again for your report.

ZWebTech Support
Top of pagePrevious messageNext messageBottom of page Link to this message

thedigitaldraftsman
Junior Member
Username: Tdd

Post Number: 50
Registered: 04-2006


Posted on Monday, February 19, 2007 - 09:49 am:   Edit Post Print Post

ZWebTech,

Yes. Converting to nurbz curves as suggested is woking for me now.

Thanks for the Help.

KSB